<em id="hzlhp"></em>
<form id="hzlhp"><nobr id="hzlhp"><th id="hzlhp"></th></nobr></form>

    <em id="hzlhp"></em>

    <form id="hzlhp"><form id="hzlhp"><track id="hzlhp"></track></form></form><form id="hzlhp"><form id="hzlhp"><th id="hzlhp"></th></form></form>
        <form id="hzlhp"></form>
        <form id="hzlhp"><form id="hzlhp"></form></form>

        Metal Level Control Systems and Components

        MetalFlowControlSystems SteadyEddyInHeadbox
        MetalFlowControlComponents FloatsAndPins

        Overview

        The metal level control?system, called a steady eddy,?is?used in the headbox for continuous sheet casting. This unit maintains the flow of metal into the headbox holding the molten bath at a constant level. The control components consist of a ceramic float, graphite plug or the complete steady eddy stem with plug.

        Pyrotek Offerings

        Pyrotek offers complete steady eddy assemblies that will last several years with proper treatment. The floats and?graphite plugs with stems need to be replaced periodically. The float (sometimes called a “pancake”) is a round rigidized ceramic material with?nuts attached to the steel frame. The metering system?has?a?graphite plug with a steel rod, protected by a ceramic coating. The plugs can be machined to conform to the drilled hole in the headbox. The typical plug is 3.962 cm x 3.658 cm (1.560 in x 1.44 in?OD). A set screw holds the stem in the?graphite plug.

        • Automatically control metal level
        • Increase safety over manual control
        • Steady Eddys
        • Floats
        • Stems
        精品国产自在天天线2019,天天做天天爱天天综合网,色综合啪啪色综合啪啪是大

        <em id="hzlhp"></em>
        <form id="hzlhp"><nobr id="hzlhp"><th id="hzlhp"></th></nobr></form>

          <em id="hzlhp"></em>

          <form id="hzlhp"><form id="hzlhp"><track id="hzlhp"></track></form></form><form id="hzlhp"><form id="hzlhp"><th id="hzlhp"></th></form></form>
              <form id="hzlhp"></form>
              <form id="hzlhp"><form id="hzlhp"></form></form>